About environmental protection waterborne wood paint the things _ water-based paint | opal chemical water-based paint
by：Opal
2021-01-25
Environmental protection water-based wood coatings has the energy conservation and environmental protection, not burning explosion and ultra low emission, low carbon and healthy, and paint film, good flexibility, water resistance, abrasion resistance, ageing resistance, resistance to yellowing, easy to use.
Waterborne wood coatings is gradually replace paint the upgrading of products, a revolution in the field of Chinese painting in the future.
types of waterborne wood paint are
with acrylic acid as main ingredients of water-borne wood coatings, is characterized by good adhesion, not deepen the color of the wood; With propylene bottoms and polyurethane composite as main ingredients of water-borne wood coatings, and increases the wear resistance and chemical resistance strong characteristic; Waterborne polyurethane paint, its comprehensive performance is superior, the fullness degree is high, film hardness can reach 1. 5 - 2 h, wear-resisting performance even more than paint.
waterborne wood paint construction method
the construction method of waterborne wood paint a lot of, like a roller coating, spraying, brush, and so on, the spraying method is one of the most main methods of waterborne wood coatings, by spraying method can obtain a thin and uniform film, for the construction of large area, more rapid and effective spraying a brush.
waterborne wood paint construction points for attention in
the construction conditions of waterborne wood coatings is: temperature of 5 to 35 ℃; Relative humidity below 85% ( About optimum condition is 23 ℃, humidity is not more than 70%) , the temperature too high or too low may cause the coating effect is bad, such as sagging, prickly heat, orange peel, bubble.
types of waterborne wood paint are
with acrylic acid as main ingredients of water-borne wood coatings, is characterized by good adhesion, not deepen the color of the wood; With propylene bottoms and polyurethane composite as main ingredients of water-borne wood coatings, and increases the wear resistance and chemical resistance strong characteristic; Waterborne polyurethane paint, its comprehensive performance is superior, the fullness degree is high, film hardness can reach 1. 5 - 2 h, wear-resisting performance even more than paint.
waterborne wood paint construction method
the construction method of waterborne wood paint a lot of, like a roller coating, spraying, brush, and so on, the spraying method is one of the most main methods of waterborne wood coatings, by spraying method can obtain a thin and uniform film, for the construction of large area, more rapid and effective spraying a brush.
waterborne wood paint construction points for attention in
the construction conditions of waterborne wood coatings is: temperature of 5 to 35 ℃; Relative humidity below 85% ( About optimum condition is 23 ℃, humidity is not more than 70%) , the temperature too high or too low may cause the coating effect is bad, such as sagging, prickly heat, orange peel, bubble.
