Can use the old tile, really stone paint renovation construction?
by：Opal
2021-01-18
Today, really stone QiChang home - in guangdong
KeBao building materials paint here can share some old tile with how really stone paint renovation and construction of the practical construction experience.
a, base treatment
1, remove float ash, eliminate the sand, become warped leather etc.
2. Should first clear the mortar on the adhesion in metope, sundry, sharp edges and protrusions bump.
3. For parts contaminated with oil, should first remove the original coating, cannot remove should use cleaner thoroughly clean.
4, for salt analysis, grassroots FanJian can use cleaning fluid to clean first, and then wash with water, can also use a wire brush or scraper, grass brush removal powder, etc.
5. Pedestal looseness and peeling parts must also be dismantled and then repair; For leakage of steel and iron, should be smooth and rust removal, and the antirust processing before the paint;
6. If there is mould on the wall, with three copies of water and a household bleach solution to remove everything mildew spot, on the surface of the mould, wait for 20 minutes, such as dry, and adding suitable amount of solution; Pay attention to wear protective glasses and skin protection device; Rinse thoroughly.
7. For the wall crack, shaved all cracks and widening; Brushed inside residual dirt, and then in pure c or silicon a crylic-acid putty filling; If needed, a few hours before pouring; Walls must be complete, continuous coating;
8. If there is a weathering, please use wire brush to clean; Try to find the back of the cement can cause weathering water, remove.
9. Wipe the dust, powder, the remaining coating particles, not binding mortar, treated the mould, etc. Thoroughly clean the use made of water and detergent solution, be careful not to let water into cracks or porous area.
2, old metope ceramic tile processing
basic level processing, check whether metope repair parts, the moisture content of mortar, alkalinity and large area is the same. If the difference is big, the color of the surface coating will be uneven. If so, should be handled in a timely manner. Other parts should check to see if there is any missing surface defects.
need to renovate the old wall, surface moisture content is generally low, plus atmospheric corrosion, the surface being poor, bibulous rate is big, needs to be transparent primer coating or closed primer. If the existing coating in good condition, primer is useful, but not a must. If there are signs of weathering, should first clear, should use wire brush to remove any loose coating, leveling parts should be repaired and primer.
because the old wall for oil paint, professional manufacturer of architectural coatings KeBao building materials as a primer coating is recommended to use ceramic tile renovation interface treatment agent. Usage is ceramic tile refurbished interface agent with proper water dilution, stirring evenly after rolling. If on the smoothness of coating on the surface of the demand is higher, should be gently after primer is dry grinding, be careful not to force grinding, damage the paint film on the surface of the bottom. According to the actual situation rolling once or twice. Is water-based paint, for old metope, can use the alkali resistant sealer rolling again.
for tile, Mosaic, marble base material surface, such as using ceramic tile renovation putty as interface agent, using the method is to use ceramic tile renovation interface agent, metope first roller coating evenly. Then with exterior wall putty leveling, the dosage of the external wall putty, according to the actual situation of metope in Mosaic metope commonly 4 times, grinding, and then, really stone paint back after finish.
a, base treatment
1, remove float ash, eliminate the sand, become warped leather etc.
2. Should first clear the mortar on the adhesion in metope, sundry, sharp edges and protrusions bump.
3. For parts contaminated with oil, should first remove the original coating, cannot remove should use cleaner thoroughly clean.
4, for salt analysis, grassroots FanJian can use cleaning fluid to clean first, and then wash with water, can also use a wire brush or scraper, grass brush removal powder, etc.
5. Pedestal looseness and peeling parts must also be dismantled and then repair; For leakage of steel and iron, should be smooth and rust removal, and the antirust processing before the paint;
6. If there is mould on the wall, with three copies of water and a household bleach solution to remove everything mildew spot, on the surface of the mould, wait for 20 minutes, such as dry, and adding suitable amount of solution; Pay attention to wear protective glasses and skin protection device; Rinse thoroughly.
7. For the wall crack, shaved all cracks and widening; Brushed inside residual dirt, and then in pure c or silicon a crylic-acid putty filling; If needed, a few hours before pouring; Walls must be complete, continuous coating;
8. If there is a weathering, please use wire brush to clean; Try to find the back of the cement can cause weathering water, remove.
9. Wipe the dust, powder, the remaining coating particles, not binding mortar, treated the mould, etc. Thoroughly clean the use made of water and detergent solution, be careful not to let water into cracks or porous area.
2, old metope ceramic tile processing
basic level processing, check whether metope repair parts, the moisture content of mortar, alkalinity and large area is the same. If the difference is big, the color of the surface coating will be uneven. If so, should be handled in a timely manner. Other parts should check to see if there is any missing surface defects.
need to renovate the old wall, surface moisture content is generally low, plus atmospheric corrosion, the surface being poor, bibulous rate is big, needs to be transparent primer coating or closed primer. If the existing coating in good condition, primer is useful, but not a must. If there are signs of weathering, should first clear, should use wire brush to remove any loose coating, leveling parts should be repaired and primer.
because the old wall for oil paint, professional manufacturer of architectural coatings KeBao building materials as a primer coating is recommended to use ceramic tile renovation interface treatment agent. Usage is ceramic tile refurbished interface agent with proper water dilution, stirring evenly after rolling. If on the smoothness of coating on the surface of the demand is higher, should be gently after primer is dry grinding, be careful not to force grinding, damage the paint film on the surface of the bottom. According to the actual situation rolling once or twice. Is water-based paint, for old metope, can use the alkali resistant sealer rolling again.
for tile, Mosaic, marble base material surface, such as using ceramic tile renovation putty as interface agent, using the method is to use ceramic tile renovation interface agent, metope first roller coating evenly. Then with exterior wall putty leveling, the dosage of the external wall putty, according to the actual situation of metope in Mosaic metope commonly 4 times, grinding, and then, really stone paint back after finish.
