Construction process to ensure correct wood coatings coating effect _ water-based paint | opal chemical water-based paint
by：Opal
2021-01-18
In the process of coating wood coatings, often encounter a lot of trouble, especially the problem of the late processing, is difficult to say, very nerve-racking!
So, how to put wood coatings for the appropriate coating?
Today, small make up will lead us into the wood lacquer coating process practice class.
wood coatings basic level processing
before besmear to examine the wood surface at the grass-roots level, and to trim nailhole crack these problems. For basic level surface dust, stains, grease, glue stains and other objects, to remove and clean. Then back and forth along the direction of the wood grain grinding, reoccupy wet cloth to clean the dust, dry.
coating wood paint primer
in the chemical fiber before besmear to brush soaked, avoid just beginning too much paint. In the paint, the movement should be simple, not a leak brush, brush can be along the direction of the wood grain, more evenly to maintain consistency, besmear brushs dry rear can on to the next to the process.
carpentry lacquer painting
the first surface besmear to brush paint, after waiting for the first line of paint of paint film is dry, then check the colour and lustre of surface, and to deal with inconsistent color module so that it can keep the surface of the consistency of color, and level off is smooth. In the second, three surface spray paint, should be strict to the requirement of indoor environment, can be reference to the first line of paint.
warm prompt: before besmear to brush, pay attention to the work place to cleaning, avoid dust float in the sky of impact on the quality of wood coatings, and cover to protect, prevent cross contamination.
wood coatings basic level processing
before besmear to examine the wood surface at the grass-roots level, and to trim nailhole crack these problems. For basic level surface dust, stains, grease, glue stains and other objects, to remove and clean. Then back and forth along the direction of the wood grain grinding, reoccupy wet cloth to clean the dust, dry.
coating wood paint primer
in the chemical fiber before besmear to brush soaked, avoid just beginning too much paint. In the paint, the movement should be simple, not a leak brush, brush can be along the direction of the wood grain, more evenly to maintain consistency, besmear brushs dry rear can on to the next to the process.
carpentry lacquer painting
the first surface besmear to brush paint, after waiting for the first line of paint of paint film is dry, then check the colour and lustre of surface, and to deal with inconsistent color module so that it can keep the surface of the consistency of color, and level off is smooth. In the second, three surface spray paint, should be strict to the requirement of indoor environment, can be reference to the first line of paint.
warm prompt: before besmear to brush, pay attention to the work place to cleaning, avoid dust float in the sky of impact on the quality of wood coatings, and cover to protect, prevent cross contamination.
