Correct besmear brushs emulsioni paint sequence and skills _ emulsioni paint | opal chemical water-based paint
by：Opal
2021-01-18
In the process of metope decorate, often encounter emulsioni paint crack or falls off phenomenon, the average person would be considered the emulsioni paint of the product.
This is not the case, a large part of the reason may be caused by construction, to introduce the below small make up, correct besmear brushs emulsioni paint sequence and skills.
the order of emulsioni paint is brushed,
1, the old wall brush emulsioni paint to original metope shoveled away, otherwise easy to react, time grew new brush emulsioni paint, foaming and fall off easily. In addition, the putty adhesive is hard to live in old metope.
2, the old walls after shoveling, use putty first metope leveling, usually twice, mainly is to look at the wall roughness, one with sandpaper after scraping again the second time.
3, can blow to light after leveling, generally is twice, once after polishing, the second was completed after grinding.
4, finally brush emulsioni paint, latex paint was usually twice, pay attention to the order is to completely dry brush later again the second time.
2, brush emulsioni paint skills
1, the material includes: drum of the two size specification, wool brush, a stick that could be longer, crepe paper, quick sticky powder, etc.
2, exfoliate: emulsioni paint with a scraper or iron brush to remove off paint film, then use sand paper to grind the surface.
3, clean up the old wall surface: filled with batch soil knife fracture plane concave hole, after being dry completely, then use sand paper burnish is flat and level.
3, emulsioni paint work quality inspection
1, the note paint decoration workers, whether the hardware on the emulsioni paint, also before paint, is there a post part of easy to paint on crepe paper for protection.
2, before the paint have a check whether the metope is dry, can ever achieve the construction requirements, whether to metope dust pollution clean up.
3, paint the walls and we will strictly control. Before brush emulsioni paint to wall lining, general need three times, during the normal time for 1 - dry 2 days, must be waterproof, moistureproof, prevent pulverization, mouldproof function, etc.
the order of emulsioni paint is brushed,
1, the old wall brush emulsioni paint to original metope shoveled away, otherwise easy to react, time grew new brush emulsioni paint, foaming and fall off easily. In addition, the putty adhesive is hard to live in old metope.
2, the old walls after shoveling, use putty first metope leveling, usually twice, mainly is to look at the wall roughness, one with sandpaper after scraping again the second time.
3, can blow to light after leveling, generally is twice, once after polishing, the second was completed after grinding.
4, finally brush emulsioni paint, latex paint was usually twice, pay attention to the order is to completely dry brush later again the second time.
2, brush emulsioni paint skills
1, the material includes: drum of the two size specification, wool brush, a stick that could be longer, crepe paper, quick sticky powder, etc.
2, exfoliate: emulsioni paint with a scraper or iron brush to remove off paint film, then use sand paper to grind the surface.
3, clean up the old wall surface: filled with batch soil knife fracture plane concave hole, after being dry completely, then use sand paper burnish is flat and level.
3, emulsioni paint work quality inspection
1, the note paint decoration workers, whether the hardware on the emulsioni paint, also before paint, is there a post part of easy to paint on crepe paper for protection.
2, before the paint have a check whether the metope is dry, can ever achieve the construction requirements, whether to metope dust pollution clean up.
3, paint the walls and we will strictly control. Before brush emulsioni paint to wall lining, general need three times, during the normal time for 1 - dry 2 days, must be waterproof, moistureproof, prevent pulverization, mouldproof function, etc.
