Exterior wall paint stone construction materials can be saved?

The dosage of the stone coating and stone coating quality, degree of skilled construction personnel, construction technology skills related to the choice of primers. Several factors affect the dosage of the stone coating at the same time. In practice means saving amount cost savings. If you want to save every square metre of stone paint dosage, you should at least from the following four aspects: 1. Using high quality stone coating according to the raw materials, the high quality stone coating due to adhesion, covering power is strong, use less than inferior stone coating. 2. Looking for skilled construction personnel with tools 'just outside wall painted stone is not enough'. This is also a kind of knowledge. First of all, the technical workers have more skills, can save a lot of stone paint. Secondly, exterior wall coating engineering stone product effect is closely related to the construction, the construction effect of skilled workers is better than that of the newcomers. 3. Mastering the technique of construction technology of 'in most cases, the stone coating using spraying technology. The process of construction, the muzzle from 40 - metope 60 cm, the muzzle size adjustment is reasonable. If muzzle being too close to wall, a small, uniform, multiple spraying effect will produce wet metope, if metope too far away from the muzzle, there will be more sand fall off. Therefore, the construction personnel on the reasonable construction according to the volume of air pressure and the muzzle. 4. Choose matching the quality of the primer. Primer must be applied at the bottom, with alkali and seal. In general, black primer as cement effect is best, but its use is the most like stone paint, because it covers the bottom of the black and other colors like stone paint volume is relatively small. If set to a primer paint the same color with stone, its dosage can also be reduced.