Great heat temperature warning! Metope problems mount, fast to measure the metope of your home is healthy? _【 Art paint online 】

how much is the need to prepare to join us? Seconds to calculate joined budget yuan

content briefly: great heat, the hottest solar term is coming, damp and hot steam will culminate at this time. Under the influence of extreme weather, the walls of the house is inevitable there will be some q
great heat, the hottest solar term is coming, & other; Wet and heat/steam & throughout; Will culminate at this time.
under the influence of extreme weather, the walls of the inevitable will appear some problems in the home, the metope of the under construction will also be affected.
what is the cause of these walls? And how to solve?



the metope of your home appeared the following questions?



how to solve this problem?
the summer temperature is higher, the moisture loss fast, dry metope can use clear water wetting at the grass-roots level, to be without MingShui putty scraping, layer of putty scraping shoulds not be too thin, if it is found that the surface strength of putty is low, surface of roll available right amount clear water putty curing.
to deal with the heat of construction, need professional construction team, construction personnel to strictly control the consumption of the product, to ensure that after some moisture volatilize or absorbed by the grassroots, putty in there is enough moisture and hydration reaction of cement;
the other workers when using the machine polishing must pay attention to the flexibility to choose the appropriate sandpaper, grinding process to keep rotary table with metope force uniform, and speed to keep even and avoid local repeatedly polished play wear phenomenon.


metope of blow be bored with child, met this situation?
　　
　　A. Putty dry faster
B. Batch of metope of blow be bored with child when peeling



how to solve this problem?
buy putty, fully understand the characteristics and advantages of cement-based putty, according to the need to select a suitable putty; At the same time in the process of the construction of the heat, to appropriately increase the proportion of water, shortening the single batch area, timely collect knife, at the same time the stirred material also should as far as possible a run out.


in construction of wall sealing paste, met this situation?
　　
　　A. In construction of caulking cream off powder
B. In construction of caulking cream white



knowledge of Nippon metope small class here today ~
in fact there are several reasons causing a problem with metope, here just list a few hot weather may appear problem.
many characterization of metope problems are similar, but the actual causes of is different. So in metope appears the problem is that we should first make clear & other; Throughout the cause &; To suit the remedy to the case can be done.