Inorganic compound floor paint technical specifications
by：Opal
2021-01-18
Product introduction
inorganic compound, floor paint, is to use nano inorganic silicate materials and high polymer resin polymer film forming of a new generation of water-based floor coating, inorganic coating has both the advantages of flame retardant, corrosion resistance, abrasion resistance, but also has high polymer resin floor texture with high bonding strength.
- Application field
, waiting room, airports, schools, hospitals, the operating room outdoor stands, warehouse, food factory, pharmaceutical factory, outdoor basketball coating on the ground, underground parking lot etc.
- Performance and parameter
has fire retardant
has good skid resistance
has excellent weatherability
to cardiac cost-effective ( The construction is simple)
derive rich color ( 1000 + color optional)
to cardiac water-based environmental protection, zero - formaldehyde
to cardiac acidproof alkali
has high adhesion
has friendly transportation
technical parameter table
number
inspection project standard requirements
the inspection results inspection according to the
1
wearability, 750/500 r, g,
0 or less. 060
0。
003 HG / T 3829 - 2 2006
pencil hardness ( Scratch)
≥H
3 H
HG / T 3829 - 2006
3
adhesion ( Row lattice spacing of 1 mm) 1,级
0
HG / T 3829 - 4 2006
mix viscosity, mpa s.
- —
450 HG / T 3829 - 2006
5
covering power, g/m2
- —
127 HG / T 3829 - 6 2006
gloss, 60 °
- —
26。 0
HG / T 3829 - 7 2006
combustion performance B1 level
B1 level
GB/T 8624 - 2012年
- Construction technology of
1, foundation treatment, with grinding machine for fine grinding, processing to no bleeding, no empty drum, no pollution, basic to keep certain roughness, for the bonding.
2, bottom coating:
( 1) Basis, loose coarse porous with 100% of the water, the bottom surface evenly coated cloth in the foundation, with drum stick after material based completely absorbed, apply evenly to cure for at least 48 hours, again detection assessment basis to roll a primer;
( 2) Solid foundation, according to the mixture ratio after mixing evenly, the drum or airless spraying machine for painting operations, cured in 8 ~ 12 hours can work.
blending ratio: A: B = 2:1
unit usage: 0. 15 ~ 0. 3 kg/m2, Depending on the basis of)
USES tools: drum
3, the coating: the three components of inorganic compound in the aqueous coating in proportion to the A and B component first and then slowly add C components, mixing while adding, blending are with flat knife blade coating, after for thickening leveling, to join the quartz sand ( 90 mesh) , add scale depending on the dosage of the unit, add, the more the greater the material usage.
blending ratio: A: B: C = 1:1:0. 9
USES tools: mixer, flat knife
unit usage: 0. 3 to 0. 6 kg/m2
4, batch starched layer: the three components of inorganic compound in the aqueous coating in proportion to the A and B component first and then slowly add C components, mixing while adding, are all with A flat knife after mixing batch, do no edge marks in the whole batch of scraping without omission, ( If there are slide requirements are not starched)
blending ratio: A: B: C = :
USES tools: mixer, flat knife
unit usage: 0. 1 kg/m2
5, surface coating, waterborne paint a two-component inorganic composite proportionally mixed mix, infiltration, the basis of first with a moderate amount of water to dry after using roller brush, or high-pressure airless spraying construction;
blending ratio: A: B = 1:1
unit usage: 0. 15 kg/m2, Over dosage, yellow or white system to roll twice)
USES tools: roller, or high-pressure airless spraying
inorganic compound, floor paint, is to use nano inorganic silicate materials and high polymer resin polymer film forming of a new generation of water-based floor coating, inorganic coating has both the advantages of flame retardant, corrosion resistance, abrasion resistance, but also has high polymer resin floor texture with high bonding strength.
- Application field
, waiting room, airports, schools, hospitals, the operating room outdoor stands, warehouse, food factory, pharmaceutical factory, outdoor basketball coating on the ground, underground parking lot etc.
- Performance and parameter
has fire retardant
has good skid resistance
has excellent weatherability
to cardiac cost-effective ( The construction is simple)
derive rich color ( 1000 + color optional)
to cardiac water-based environmental protection, zero - formaldehyde
to cardiac acidproof alkali
has high adhesion
has friendly transportation
technical parameter table
number
inspection project standard requirements
the inspection results inspection according to the
1
wearability, 750/500 r, g,
0 or less. 060
0。
003 HG / T 3829 - 2 2006
pencil hardness ( Scratch)
≥H
3 H
HG / T 3829 - 2006
3
adhesion ( Row lattice spacing of 1 mm) 1,级
0
HG / T 3829 - 4 2006
mix viscosity, mpa s.
- —
450 HG / T 3829 - 2006
5
covering power, g/m2
- —
127 HG / T 3829 - 6 2006
gloss, 60 °
- —
26。 0
HG / T 3829 - 7 2006
combustion performance B1 level
B1 level
GB/T 8624 - 2012年
- Construction technology of
1, foundation treatment, with grinding machine for fine grinding, processing to no bleeding, no empty drum, no pollution, basic to keep certain roughness, for the bonding.
2, bottom coating:
( 1) Basis, loose coarse porous with 100% of the water, the bottom surface evenly coated cloth in the foundation, with drum stick after material based completely absorbed, apply evenly to cure for at least 48 hours, again detection assessment basis to roll a primer;
( 2) Solid foundation, according to the mixture ratio after mixing evenly, the drum or airless spraying machine for painting operations, cured in 8 ~ 12 hours can work.
blending ratio: A: B = 2:1
unit usage: 0. 15 ~ 0. 3 kg/m2, Depending on the basis of)
USES tools: drum
3, the coating: the three components of inorganic compound in the aqueous coating in proportion to the A and B component first and then slowly add C components, mixing while adding, blending are with flat knife blade coating, after for thickening leveling, to join the quartz sand ( 90 mesh) , add scale depending on the dosage of the unit, add, the more the greater the material usage.
blending ratio: A: B: C = 1:1:0. 9
USES tools: mixer, flat knife
unit usage: 0. 3 to 0. 6 kg/m2
4, batch starched layer: the three components of inorganic compound in the aqueous coating in proportion to the A and B component first and then slowly add C components, mixing while adding, are all with A flat knife after mixing batch, do no edge marks in the whole batch of scraping without omission, ( If there are slide requirements are not starched)
blending ratio: A: B: C = :
USES tools: mixer, flat knife
unit usage: 0. 1 kg/m2
5, surface coating, waterborne paint a two-component inorganic composite proportionally mixed mix, infiltration, the basis of first with a moderate amount of water to dry after using roller brush, or high-pressure airless spraying construction;
blending ratio: A: B = 1:1
unit usage: 0. 15 kg/m2, Over dosage, yellow or white system to roll twice)
USES tools: roller, or high-pressure airless spraying
