Interior wall coating what problem should note when using [ 2018 decoration required]

In recent years, the first selection of interior decorative coatings has become interior wall decoration. So, in the use of interior wall paint, we should pay attention to what issues? Today's editorial problems should be noticed when using the interior wall coating were summarized. 1. At the bottom of the uneven color and untreated can result in uneven coating color, coating must be covered with putty or primer. Consumers can also be strong covering power through selective coatings, dilute besmear to brush by the regulation, to avoid the phenomenon of uneven color. In addition, when choosing coating, should pay attention to choose the same manufacturer, the same variety, the same batch number of the product, otherwise there will be color difference. 2. Rough surface, the causes of these problems have a lot of little a knot in one's, such as primary raw, smooth, clean, use brush with grains of sand, sundry or operating environment is not clean, dust and dirt on the new brush paint quality. Avoid measures include: basic cleaned, putty powder shave as required, with sand paper burnish is flat and level. Used the brush tools should be clean and check carefully. During the period of construction, paint and environment should be dustproof. 3. Peel if primary too smooth, or with grease and dirt, it is easy to make the coating adhesion not firm and fall off. In addition, be bored with child bad adhesion, coating adhesion, form 'outside the coke tender' state, in the case of difference in temperature big or humidity is not uniform, coating the surface easy to crack. Prevention measures include: wire brush smooth base and clean; Using solvents to remove the oil and water; When need primer, had better choose to match the finish products. Coating should not be too thick, should be based on covering at the grass-roots level and the principle of impermeable, uniform coating should be full, color should be consistent. According to the different basic choose different putty, made putty bonding strength and bonding strength of coating to be able to adapt to each other. In addition, also should pay attention to basic dry before painting, for don't need the part of the coating and coating parts, should be timely make the finished product protection. Above is xiao summary of interior decorative coatings should pay attention to some problems. Interior decorative paint recommends using jade feng interior decoration special coatings. Please read the top ten paint coating construction problems and solutions [ 2018 the latest summary] 'To learn more about coating information.