It is advisable to spray really stone paint a few times? A molding or two?

Problem description: 1. A shape is not easy to control the thickness of the coating, especially for the new spraying hand, are more likely to cause construction defects. 2. A molding can't overcome the defects of construction, but two forming can be caused by the previous process to take remedial construction. How many times spraying really stone paint right? Better form once or twice? 1. A shape is not easy to control the thickness of the coating, especially for the new spraying hand, are more likely to cause construction defects. 2. A molding can't overcome the defects of construction, but two forming can be caused by the previous process to take remedial construction. Some defects are caused by a wall, some of them are caused by coating formula. Construction personnel, however, may not know that, if they have a molding, trouble came. As a result, secondary forming can be used as construction risk of firewall. 3. Due to too much paint, a shape is often not smooth enough. If really stone paint very thin, if not careful will droop. Paint quantity is little, secondary molding fan atomization effect is good, easy to control, spraying smooth, a little feel much better after polishing. 4. One step forming can reduce construction costs and risks. Sometimes construction depends on the weather, especially in the south of the rainy season, when the time is very short, it can be difficult to construction. If found that white paint surface, after a molding losses will be very big. If a thin layer of spray paint surface after there is no white, basically it's not a big problem. If a bit pale, can also be covered when the second delay during the construction. Even if the time is too tight, it is necessary to the construction, which really stone paint dry block subsequent water content, dry paint to buy time for the second construction, the paint dry after water won't become white. 5. Intuitively, many people think that the consumption of secondary construction paint is heavy, but according to our experience, the consumption of a construction paint consumption and secondary construction paint roughly the same amount. Due to the thickness of a construction is not easy to grasp, often spray is too thick ( Do not include to spray the thickness of the cut corners) , secondary atomization effect is good, construction paint consumption accurately, considering the benefits of other secondary construction, actually cost a lot. 6. According to our construction experience, yellow, red, orange and brown should be special shape twice, otherwise they are easy to 'blossom'.