KeBao coating: granite coating paintings construction technology
by：Opal
2021-01-18
Stone chips coating is a kind of high-grade unique building internal and external wall materials of environmental protection.
It is made of silicone acrylic emulsion, special stone chips, natural stone, and various kinds of imported additive made by a special process.
After spraying, to ensure that all primary joint perfect surface effect, similar to the appearance of the granite slabs.
product features: easy construction, simple sense is strong, like granite, appearance, good toughness and crack resistance, high strength, anti-collision, do not fade, not aging, flame retardant, heat resistance, good weatherability and guarantee more than 15 years.
applicable base: apply to concrete walls, cement mortar, the eta board, plywood, PC board, ACC board, asbestos board, board, sheet metal, the tool reference plane such as ERP, All sorts of base level) Different processing methods.
base level requirements: dry, solid, smooth, no dust, grease, salt and alkali, etc. Base on the surface of the surface strength must be above 5 KGF /, PH value less than 10, moisture content is below 10%.
construction environment: 5 ~ 40, temperature is not higher than 85% relative humidity, air compressor gas supply pressure not less than eight 10公斤。 In windy and rainy conditions, should stop construction or shade effectively, and can use spray or partial oscillation. The construction method in line with really stone paint.
theory usage: 0 seal primer. 15 ~ 0. 2 kg /, stone paint 3 ~ 5 kg /, zero water proof paint. 15 ~ 0. 20 kg /.
construction technology:
element to the
( 1) 1 - 3 cement mortar with light maintenance more than 15 days, flour flour should level off light but not too smooth, can not have cut Angle.
before construction, cement surface or coating surface must not have moss, grease or other contaminants, but should be completely removed. Otherwise it will affect the adhesion, keep fully dry.
( 3) If the old paint coating, before construction must detect or confirm the coating surface can be attached, otherwise, must be removed.
priming paint and the back cover processing
object should be primer coating treatment of rear cover and to prevent stone paint is contaminated with permeability and moisture permeability. Every time the amount of primer should be 0. More than 2 kg/until no exudation.
stick tape line
paste adhesive tape must be on a straight line, and then in a horizontal line. If there is a seam, can avoid a nail, find the source of the tape after spraying.
sheet painting
cuttings at the start of the paint spraying, spraying thickness is 2 - 4 mm, average pressure air compressor for eight 10 kilograms. When spraying, other do not need to spray the basic surface with newspaper or tape is completely isolated. 24 - spraying after hardening 48 hours, spraying the surface must conform to the sample appearance, dosage of about 4 - 5kg/。 Grinding
before the stone lacquer is completed, the granite acute particles on the surface of the grinding chip paint to 30 - About 50%. Enhance the stone paint aesthetic feeling, reduce the sharpness, avoid dust-free accumulation.
full silicon a crylic-acid cover smooth painting
stone paint completely hardened - 24 After 48 hours, the spray can be filled with silicon a crylic-acid paint, every square metre should be 0. 15 ~ 0. 20kg。
product features: easy construction, simple sense is strong, like granite, appearance, good toughness and crack resistance, high strength, anti-collision, do not fade, not aging, flame retardant, heat resistance, good weatherability and guarantee more than 15 years.
applicable base: apply to concrete walls, cement mortar, the eta board, plywood, PC board, ACC board, asbestos board, board, sheet metal, the tool reference plane such as ERP, All sorts of base level) Different processing methods.
base level requirements: dry, solid, smooth, no dust, grease, salt and alkali, etc. Base on the surface of the surface strength must be above 5 KGF /, PH value less than 10, moisture content is below 10%.
construction environment: 5 ~ 40, temperature is not higher than 85% relative humidity, air compressor gas supply pressure not less than eight 10公斤。 In windy and rainy conditions, should stop construction or shade effectively, and can use spray or partial oscillation. The construction method in line with really stone paint.
theory usage: 0 seal primer. 15 ~ 0. 2 kg /, stone paint 3 ~ 5 kg /, zero water proof paint. 15 ~ 0. 20 kg /.
construction technology:
element to the
( 1) 1 - 3 cement mortar with light maintenance more than 15 days, flour flour should level off light but not too smooth, can not have cut Angle.
before construction, cement surface or coating surface must not have moss, grease or other contaminants, but should be completely removed. Otherwise it will affect the adhesion, keep fully dry.
( 3) If the old paint coating, before construction must detect or confirm the coating surface can be attached, otherwise, must be removed.
priming paint and the back cover processing
object should be primer coating treatment of rear cover and to prevent stone paint is contaminated with permeability and moisture permeability. Every time the amount of primer should be 0. More than 2 kg/until no exudation.
stick tape line
paste adhesive tape must be on a straight line, and then in a horizontal line. If there is a seam, can avoid a nail, find the source of the tape after spraying.
sheet painting
cuttings at the start of the paint spraying, spraying thickness is 2 - 4 mm, average pressure air compressor for eight 10 kilograms. When spraying, other do not need to spray the basic surface with newspaper or tape is completely isolated. 24 - spraying after hardening 48 hours, spraying the surface must conform to the sample appearance, dosage of about 4 - 5kg/。 Grinding
before the stone lacquer is completed, the granite acute particles on the surface of the grinding chip paint to 30 - About 50%. Enhance the stone paint aesthetic feeling, reduce the sharpness, avoid dust-free accumulation.
full silicon a crylic-acid cover smooth painting
stone paint completely hardened - 24 After 48 hours, the spray can be filled with silicon a crylic-acid paint, every square metre should be 0. 15 ~ 0. 20kg。
