KeBao: natural debris paint construction matters needing attention
by：Opal
2021-01-18
At present, the natural stone chips market is booming, the construction team, engineering users or retail is very attention to this kind of new decorative material.
But the problem is here.
Since the products on the market or new products, so a lot of people do not know much about its performance and construction method.
today I say with simple construction process needs to be done.
1。 Please select a professional construction team really stone paint.
2. Because really stone paint itself weight, and wide usage, so widely used in packing specifications ( 75 kg/barrel) 。 When transportation or shelved for a long time for a long time, precipitation occurs. To use electric drill blender mixing evenly before open barrels. Prior to the factory adjust viscosity of construction. Diluted the viscosity is not recommended. Really is very thick, add water not more than 5%.
3. Suggest using hanging basket really stone paint spraying. After spraying leaves scaffolding juncture, not dismantle scaffold board look not to come out, down significantly.
4. Temperature: construction usually under 5 more than 35; Humidity: suitable for construction of the air humidity is 60% More than 70%, 85%, rainy days are not allowed to construction; Ensure that within 24 hours after spraying can't get wet in the rain; The wind cannot really stone paint spraying 4 class above.
5. The pressure of the air compressor should reach more than 8 kg, actual coating weight is about 3 per square metre. 5 kg to 4. 5公斤。 Concavo-convex strong feeling really stone paint will use 5 to 6 kg, so really stone paint coating rate depending on the product itself size, the product construction model and the base surface roughness. Before construction, should be based on site condition test coating rate.
6. Whatever the spraying, spraying the litter: there will be losses. Shakeout should according to the construction of the product in the process of spraying viscosity, pressure, construction personnel, construction method, etc. Advice before the project starts to do the product construction test.
the matters of attention in the construction of course can't say all of a sudden, there are a variety of other reasons to consider, such as the construction site environment, technical level of workers, and so on, but after all, the construction of natural rock paint or construction professionals are needed to implement, otherwise the effect will be much worse.
today I say with simple construction process needs to be done.
1。 Please select a professional construction team really stone paint.
2. Because really stone paint itself weight, and wide usage, so widely used in packing specifications ( 75 kg/barrel) 。 When transportation or shelved for a long time for a long time, precipitation occurs. To use electric drill blender mixing evenly before open barrels. Prior to the factory adjust viscosity of construction. Diluted the viscosity is not recommended. Really is very thick, add water not more than 5%.
3. Suggest using hanging basket really stone paint spraying. After spraying leaves scaffolding juncture, not dismantle scaffold board look not to come out, down significantly.
4. Temperature: construction usually under 5 more than 35; Humidity: suitable for construction of the air humidity is 60% More than 70%, 85%, rainy days are not allowed to construction; Ensure that within 24 hours after spraying can't get wet in the rain; The wind cannot really stone paint spraying 4 class above.
5. The pressure of the air compressor should reach more than 8 kg, actual coating weight is about 3 per square metre. 5 kg to 4. 5公斤。 Concavo-convex strong feeling really stone paint will use 5 to 6 kg, so really stone paint coating rate depending on the product itself size, the product construction model and the base surface roughness. Before construction, should be based on site condition test coating rate.
6. Whatever the spraying, spraying the litter: there will be losses. Shakeout should according to the construction of the product in the process of spraying viscosity, pressure, construction personnel, construction method, etc. Advice before the project starts to do the product construction test.
the matters of attention in the construction of course can't say all of a sudden, there are a variety of other reasons to consider, such as the construction site environment, technical level of workers, and so on, but after all, the construction of natural rock paint or construction professionals are needed to implement, otherwise the effect will be much worse.
