Old waterborne wood paint are solid wood furniture renovation process _ | wood coatings renovation opal chemical water-based paint
by：Opal
2021-01-18
Solid wood furniture use time for a long time will become old, paint film surface appear crack and wear phenomenon, if you want to make it like new, just need to paint it again.
But many people may not know how to renovate, solid wood furniture paint some of what problem should be paid attention to.
Below small make up, gave you talk about the old waterborne wood paint are solid wood furniture renovation process.
a, renovating preparation
1, due to renovation needs polishing paint furniture, so in the first floor with good newspaper, then open the doors and Windows, ensure adequate ventilation. Brush to paint the real wood furniture placed in the newspaper, before you start wearing masks and gloves.
2, use a screwdriver remove the furniture hardware. This has two advantages: one is to ensure that no paint brush to the hardware; Secondly, the hardware change new paint or full.
3, with glue line repair agent have a gap, there is dent. Scrape putty knife away excess glue seam an agent, and then let the glue seam an agent to dry.
4, the furniture surface polished with sandpaper. This is done to remove dirt on the surface of the furniture or paint, make primer easier to adhere to the furniture. Brushing glue seam an agent, if there are rough also want to use sand paper burnish, fully make glue seam an agent of the place and the rest of the furniture maintain level.
5, after the polished surface of the furniture, use clean cloth to wipe gently, can remove the surface dirt, make furniture surface clean and tidy.
2, start with primers and paint
1, if you want to furniture looks even color, is a layer of primer coating. Paint brush gently for wooden furniture surface coating a layer of primer. Paint brush to brush, horn, hard brush to the area, such as primer dry grinding lacquer on top.
2, such as primer when dry, smooth surface with fine sand paper. Use sand paper burnish can make better adhesion on the primer paint.
3, began to paint. With chemical fiber brush equably besmear to brush, pay special attention to the places where edge horn is bad brush. Such as film after drying, check to see if there is not completely besmear to brush the place that reach the designated position.
4, if necessary, a layer of paint is brushed again. According to the site construction effect, a layer of primers and paint is not enough to achieve the result that we require, as a layer of paint to dry, then use the above method is the same paint brush again.
5, brush paint protection. Wood coatings, such as dry, paint, varnish to avoid furniture nicks and scratches. It also can add slight sheen to furniture, wait for the final wood coatings dry.
a, renovating preparation
1, due to renovation needs polishing paint furniture, so in the first floor with good newspaper, then open the doors and Windows, ensure adequate ventilation. Brush to paint the real wood furniture placed in the newspaper, before you start wearing masks and gloves.
2, use a screwdriver remove the furniture hardware. This has two advantages: one is to ensure that no paint brush to the hardware; Secondly, the hardware change new paint or full.
3, with glue line repair agent have a gap, there is dent. Scrape putty knife away excess glue seam an agent, and then let the glue seam an agent to dry.
4, the furniture surface polished with sandpaper. This is done to remove dirt on the surface of the furniture or paint, make primer easier to adhere to the furniture. Brushing glue seam an agent, if there are rough also want to use sand paper burnish, fully make glue seam an agent of the place and the rest of the furniture maintain level.
5, after the polished surface of the furniture, use clean cloth to wipe gently, can remove the surface dirt, make furniture surface clean and tidy.
2, start with primers and paint
1, if you want to furniture looks even color, is a layer of primer coating. Paint brush gently for wooden furniture surface coating a layer of primer. Paint brush to brush, horn, hard brush to the area, such as primer dry grinding lacquer on top.
2, such as primer when dry, smooth surface with fine sand paper. Use sand paper burnish can make better adhesion on the primer paint.
3, began to paint. With chemical fiber brush equably besmear to brush, pay special attention to the places where edge horn is bad brush. Such as film after drying, check to see if there is not completely besmear to brush the place that reach the designated position.
4, if necessary, a layer of paint is brushed again. According to the site construction effect, a layer of primers and paint is not enough to achieve the result that we require, as a layer of paint to dry, then use the above method is the same paint brush again.
5, brush paint protection. Wood coatings, such as dry, paint, varnish to avoid furniture nicks and scratches. It also can add slight sheen to furniture, wait for the final wood coatings dry.
