On the exterior wall coating color behind the wall? From these three aspects can reduce!

Exterior wall coating color has a great influence on the the integral effect of the building facade, is the direct embodiment of residential construction quality, seriously affect the architectural appearance. The color difference is caused by product and improper operation. Color difference exist forever, of course, but how to control to minimum color, this is negligible on the vision? Product quality is stable raw material supply source manufacturers, conform to the standards of quality and high capacity of single cylinder source is the key to minimize chromatic aberration. Single cylinder volume, the greater the color more easy to control. If the same exterior wall coating production of more batch, color is more likely. Fujian KeBao has a capacity of 60 tons/batch of single cylinder production cans, can produce 60 tons of paint, to minimize the color difference. Standardization of construction technology in construction of exterior wall, should choose professional construction personnel, in strict accordance with the construction standards for the construction. Foundation treatment, be bored with child group of scraping, primer coating, paint coating, advocate material, construction and other procedures should be carried out in accordance with the construction requirements. Support product without authorization, shall not cut corners and replaced. If it is difficult to ensure uniform color completely, it is better to separate metope of exterior wall construction, in order to reduce visual color difference, convenient repair later. Scientific construction management in the same construction site, and with one side wall, must use the same exterior wall coating, and set aside a barrel or half barrel for repair. In addition, the same shall be a complete metope, rather than a few times to complete. If advocate material shortage, should notice the rest of the construction area, in order to complement in advance, reduce duplication of complement causes the brightness of the photo. In fact, as long as the color difference control within a certain range, the color of the painting on the wall is consistent, can 'solve' off color problem.