Outlining the solid wood furniture renovation brush wood coatings process _ | furniture renovation opal chemical water-based paint
by：Opal
2021-01-25
Solid wood furniture used over the years, the inevitable will appear to take off the lacquer, crack, discoloration, and so on and so forth, this time you need for renovation.
Solid wood furniture, however, is a problem how to refurbish paint, after all, many people will not contact with this knowledge, now, small make up is simple explain some retrofit method for everyone.
the first it is polished: buy real wood furniture above will have to brush paint, have a plenty of paint, water-based paint, wood oil, and other products. The different products, at the time of renovation has different process. Either way besmear to brush, in general, at the time of renovation are proposed to surface polished away, then renovated, otherwise it's easy to have a problem.
the second is to take off the lacquer, furniture USES many years later, before it is not easy to besmear brushs the paint off, you will need to use paint remover to top coating. Of course, there may be some furniture materials such as chemical paint or asphalt, this time with the chemical cleaning is not recommended, because is not safe. If it is not out, once again renovation will appear uneven colors or is concave and convex inequality.
the third is to clean: after completion of solid wood furniture polish, paint, need to cleaning, furniture surface to remove surface dust, etc. , if a large area can use hair dryer, small can be used to clean dry cotton cloth, brush, sponge, etc. To do this is to avoid dust impact the effect of renovation, reduce the harm of furniture.
is choice 4: choose according to need to renew the need wood coatings, is to use paint, water-based paint, wood oil or other products. Because different products have different effect, and environmental protection. Paint damage, water paint, wood oil relative to many environmental protection.
the first it is polished: buy real wood furniture above will have to brush paint, have a plenty of paint, water-based paint, wood oil, and other products. The different products, at the time of renovation has different process. Either way besmear to brush, in general, at the time of renovation are proposed to surface polished away, then renovated, otherwise it's easy to have a problem.
the second is to take off the lacquer, furniture USES many years later, before it is not easy to besmear brushs the paint off, you will need to use paint remover to top coating. Of course, there may be some furniture materials such as chemical paint or asphalt, this time with the chemical cleaning is not recommended, because is not safe. If it is not out, once again renovation will appear uneven colors or is concave and convex inequality.
the third is to clean: after completion of solid wood furniture polish, paint, need to cleaning, furniture surface to remove surface dust, etc. , if a large area can use hair dryer, small can be used to clean dry cotton cloth, brush, sponge, etc. To do this is to avoid dust impact the effect of renovation, reduce the harm of furniture.
is choice 4: choose according to need to renew the need wood coatings, is to use paint, water-based paint, wood oil or other products. Because different products have different effect, and environmental protection. Paint damage, water paint, wood oil relative to many environmental protection.
