Sand water bag, water bag specification construction matters needing attention

Note 1 the paint primer must be in place daub, not missing a corner, especially the side of the door hole, line and waist line is an internal Angle ( During the color jump) 。 Otherwise, when spraying main ingredient, protective film was torn off or masking paper is torn off, the area of water bag color coating is easy to warp, prone to MAO. Note 2 water bag and colorful paint spraying construction should be used as hanging basket. By the best two people to build special parts, a person with a baffle, another spray multicolor paint. In this way, multicolor coating will be evenly spray. If the gunman need damper and painting at the same time, the distance between the spray gun and metope is hard to remain stable. Water bag water color painting construction can't use the wire. Hard from far to near uniform spraying, it is easy to spray the flowers. Note 3 when metope need because of the uneven construction repair, repair the same work area at the same time, such as a few square or a facade, repair, where can't see the flower because the flower is likely to be more and more. In construction of water bag colorful coating, please pay attention to the weather forecast. Spraying multicolor coating, only after the first drying can spray for the second time. General interval for 12 hours. After spraying multicolor paint, for at least 24 hours after can cover surface. At the same time, pay attention to ensure the construction within one week after the rain and heavy rain. Note 4 do not force stirring water bag colorful coating, water don't, don't mix with other substances. Once opened, use the multicolor paint. When making plane water bag color coating, surface more smooth, so the gun should move faster, in order to prevent the color coating for the first time. Be careful 5 water package multicolor coating must be done. Outstanding color paint film is not dense, anti-aging, weather resistance, resistance to pulverization and color preserving effect will be greatly reduced. In order to cover during the period of construction of uneven thickness, it is recommended to use matte varnish. In addition, in order to avoid the frosting phenomenon caused by roller, suggest building european-style components coating finish. Note 6 eaves Angle should be paid attention to the construction of Yin and Yang. Yang Angle should be covered in the spraying department, in order to avoid material consumption. Yin Angle should be dealt with in front of the plane, lest the artificially feel hard to spray position. First of all, should sweep once, then spraying the surface, in order to easy to spray is very thick. In short, water bag should not be afraid of colorful coating treatment of Yin and Yang Angle of material consumption, to walk up and down or so in the larger strokes.