� spraying different surface stone coating
by：Opal
2021-01-18
Stone coating is a kind of installation materials, often can see in our building.
There are many kinds of stone paint, many types of stone paint are generally curved surface.
This kind of situation should be how to paint?
Explain in detail below the stone paint ten big brand small series.
a, cylindrical
spraying methods: cylindrical spraying tool should use small nozzle, using vibration spraying method, as far as possible in the peripheral spraying water package of water type sand mold coating and water bag.
and then use the brush to brush the water in the water and sand. If not have place, also can use the brush again, spray gun spray it again. Please note that the thickness of the structure should not be too thin or too thick.
2, three-dimensional Roman column
spraying methods: meet the construction surface, require the use of 'M' type linear spraying method, about 40 cm from grassroots, vertical cylinder from top to bottom spray. Before, on the other side of the spray should be in a rock painting. Recommended 60 degrees rotation Angle spray.
third, square shape,
spraying method: because the square column sharp edges and corners, when construction slightly uneven spraying can lead to fuzzy edges and corners, so spraying shall be carried out in 50 cm distance, to ensure the general appearance of the original building.
this is fujian KeBao building materials paint co. , LTD. With the introduction of the stone surface spraying coating, so this article to this end, thank you for reading!
a, cylindrical
spraying methods: cylindrical spraying tool should use small nozzle, using vibration spraying method, as far as possible in the peripheral spraying water package of water type sand mold coating and water bag.
and then use the brush to brush the water in the water and sand. If not have place, also can use the brush again, spray gun spray it again. Please note that the thickness of the structure should not be too thin or too thick.
2, three-dimensional Roman column
spraying methods: meet the construction surface, require the use of 'M' type linear spraying method, about 40 cm from grassroots, vertical cylinder from top to bottom spray. Before, on the other side of the spray should be in a rock painting. Recommended 60 degrees rotation Angle spray.
third, square shape,
spraying method: because the square column sharp edges and corners, when construction slightly uneven spraying can lead to fuzzy edges and corners, so spraying shall be carried out in 50 cm distance, to ensure the general appearance of the original building.
this is fujian KeBao building materials paint co. , LTD. With the introduction of the stone surface spraying coating, so this article to this end, thank you for reading!
