Stone paint construction, you must know the slot aesthetics is!

Lattice shapes in order to make the wall effect is not stiff, don't choose as far as possible when the stone coating construction square grid, such as long, long vertical lattice grid and 'workers' glyph lattice is right choice. However, consideration should be given to the use function of the building. For example, a business unit office building should choose a more sedate partition design, and residential buildings, shopping malls, school, stadium, etc can choose a more lively zoning plan. Stone coating the partition location in order to make the stone paint spraying effect is closer to the stone material, can be adopted in principle the same as the stone of partition, such as Angle of partition of Yin and Yang, the Windows partition and the floor edge partition. However, given the limitations of stone, there is no need in the Angle of Yin and Yang stone coating can be divided into compartments. Advice should be carried out at the side of the window, car and pay attention to avoid even the appearance of small and small side. The size of the stone shape paint partition should be reasonable according to the height of the building. In general, the division of high-rise building should be in 1. 5 - 2 ㎡, the division of multi-storey building should be controlled in 1 - 1. The division of 5 ㎡, low-rise buildings shall be within 1 ㎡. Stone paint frame joint width frame joint width should be according to the frame size, the reasonable design, general at 0. 8 - 1. 5 ㎝, also can design for horizontal width, vertical narrow bezel and horizontal narrow border effect, but the frame joint width as possible control in two ㎝. The color of the stone coating during the construction of the partition wall joint this detail is often overlooked, but it actually affected the overall effect of the stone coating. General design principle is in the color of the stone coating and color contrast between the effect of partition seam.