Stone paint renovation have the mould of the old walls?
by：Opal
2021-01-18
Stone coating scope broad, applies to new the adornment of metope, also apply to the original exterior wall coating and ceramic tile wall renovation.
It is worth noting that the long mildew spot for renovation and construction of exterior wall coating conditions, mould processing and closely related to the use of different materials of stone coating.
Let's and professional manufacturer of architectural coatings
KeBao building materials coatings.
To see
stone paint renovation have a mould of the old walls?
1。 Deal with the wall of the mould with tooth brush with alcohol. When the exterior appear small mildew spot, use toothbrush brushes off the mould first, then dip in with soft cloth with alcohol to wipe gently, can make the wall is dry, to prevent mold growth.
2. Use bleach ( Powder) Handle the wall of the mould, the bleach, Powder) And the proportion of water to 1:99 in a spray bottle and spray on the wall of the mould, use cloth to wipe the walls, and then rinse with water, can solve the problem of mold wall immediately.
3. Under the condition of small metope mildew, with 80% alcohol washed metope is enough. Pay attention to the ventilation when cleanness, glove, masks and glasses.
4. If there is a large area of mold wall paint, need to mold the metope of rooting out again, and then scrape off the external wall putty, make metope smooth.
5. In order to enhance the coating adhesion, old metope must seal primer coating. After fully dry, seal primer shall be carried out in accordance with the construction technology of stone coating coating construction next.
stone paint renovation have a mould of the old walls?
1。 Deal with the wall of the mould with tooth brush with alcohol. When the exterior appear small mildew spot, use toothbrush brushes off the mould first, then dip in with soft cloth with alcohol to wipe gently, can make the wall is dry, to prevent mold growth.
2. Use bleach ( Powder) Handle the wall of the mould, the bleach, Powder) And the proportion of water to 1:99 in a spray bottle and spray on the wall of the mould, use cloth to wipe the walls, and then rinse with water, can solve the problem of mold wall immediately.
3. Under the condition of small metope mildew, with 80% alcohol washed metope is enough. Pay attention to the ventilation when cleanness, glove, masks and glasses.
4. If there is a large area of mold wall paint, need to mold the metope of rooting out again, and then scrape off the external wall putty, make metope smooth.
5. In order to enhance the coating adhesion, old metope must seal primer coating. After fully dry, seal primer shall be carried out in accordance with the construction technology of stone coating coating construction next.
