Water bag colorful coating construction matters needing attention

1. Spraying, base moisture content should be less than 10%, surface strength should be higher than 0. 4 million mpa; The environment temperature is higher than 5 ℃. 2. For prior to application on the protection of the surrounding area. 3. Before each spraying process operation must ensure a after spraying material completely dry. 4. Before each spray drying process, should avoid to rain and dust pollution. 5. If the finished product of metope color requirement is the same as color intermediate coating, should be in the middle of the color coating line after completing planning and layout. 6. Elastic model for intermediate coating spraying operations must be based on the principle of full coverage. 7. Before spraying color paint, you can use the clean coarse round stick gently stir well. Do not force stirring in order to avoid damage to the particles. 8. Multicolor paint spraying pressure tank (preferred Water bag special gun) , caliber and pressure of the spray gun adjustments according to the requirements of the different textures. 9. When spraying big color piece, should remove the outer nozzle nut. 10. Tore down a slotted tape before color spray paint finish. 11. Is pure water quality formula, colorful coating cannot be diluted before spraying. 12. Product transportation and storage stability safety, should avoid sunlight, high temperature and pollution. The product after opening should not be long-term preservation. Please use in three months. Source: http://www. kobojc。 com/Product- 5 - 1. HTML, really stone paint manufacturers