Water bag to spray evenly coating? ？ ？ ？

Water bag multicolor paint spray gun spraying mostly. In operation, the spray gun's improper use can also lead to coating uneven distribution. Let's take a look at the solution. Gun spacing is smaller, the spraying pressure, the greater the pressure effect on the product, the greater the water bag multicolor coating can appear uneven coating, lead to too thick coating. Spray gun with a gun, the greater the distance between the smaller pressure, coating easy to loss, part of the spray coating material is too little, the thickness of the reach regulation. Perpendicular to the coating surface coating sectors. Manual operation of the spray gun, spraying width cannot too big, can appear otherwise uneven coating. The operation of the spray gun should always be parallel to the coating surface and perpendicular to the coating area. Operating speed is not stable, uneven thickness, too fast, the coating is too thin, homework too slow. Coating is too thick. Using spraying equipment, must make moderate intensity, distance is appropriate, in order to obtain the required coating effect. After construction, some places need to improve. Paint and auxiliary equipment should be clean, paint should be blocked and retention of residue after use. These are matters that need attention. Note: the construction method and density will directly influence the final stone effect.