Water bag water spray colorful coating spent?

Water package in the colorful coating will inevitably encounter in the process of production and construction, raw materials matching color dot size, storage, stability, cracking, frosting, and other issues. Therefore, it is necessary in the early days of the water in the water with good understanding and understanding, and prevention in time. Diamond chemical editors will study together with everybody water bag of colorful coating common problems. How to control the size of the water bag water point? Observe the color the size of the particles. If color particles is too small, copy them. Water bag color particles depends on the size of the color particles formed speed mixing and dispersion, according to the requirements of the specific color setting, color particles should follow the shape of the high frequency method of multiple observation and adjustment; If the injection point shape is small, can be appropriately increased pressure spray gun to spray again. If in the preparation of water bag water colorful coating particles too soft? Powder content can be appropriately increased according to actual condition. At present, the more effective method is to choose the high glass transition temperature of the emulsion blend, can improve the hardness of particles. Second, you can add other additives, concrete effect need to be tested according to actual situation. When the content of water bag water color coating latex low what happens? If the amount of emulsion in water package of water type coating is low, the corresponding linear and adhesion properties such as colour retention, resistance to ultraviolet will go down. On the other hand, if the emulsion is too much, brush your teeth after the wall is not easy to become dry. If the water in the water came out of it? Clean up putty layer coating area, spraying again after cleaning. Pay attention to protect other areas have been completed, to avoid secondary pollution. What is the cause of the water bag joint printing? This may be due to uneven water bag water coating or base due to uneven surface treatment. At present the effective solution is to block building. How to solve the water bag water spray thick crack? Water bag multicolor coating is made of emulsion and paste color particles. After the film, the elastic coefficient is very high. Thickness is higher, the better the crack resistance, film thickness of the thinner, the cracking phenomenon will occur. Water bag without the use of colorful coating finish, ok? Water bag is located in the complex environment outdoor colorful coating, can have very good protection of main coating effect. It has uv resistance, increase the adhesion, weather resistance, resistance to yellowing, etc. Recommend the use of special water bag finishing agent. Why is the water in the water is not suitable for storage? Water bag color is a kind of water-based latex particles dispersed in the emulsion medium but not mutually mixed materials. Coating or reactive, due to the coating composition of volatile, the fusion of color particles is only a matter of time, bad products during storage will layered mold after less than a week.