Waterborne wood coatings construction must pay attention to the six details _ wood coatings | opal chemical water-based paint
by：Opal
2021-01-18
Seemingly simple wooden furniture, once after coated with waterborne wood coatings, immediately become tall on up, it's enough to show the special efficacy of waterborne wood paint but there are exceptions, if painted the result is bad, can backfire, so at the time of construction must do a good job details.
waterborne wood paint construction details
1, color, whether to have error
in the wood coatings construction, pay attention to the color error, surface color is even, if there is a different shade of color, to make sure that the surface no color, no brush marks.
2, clear wood grain is
for transparent paint effect of wood, painted furniture, should guarantee the natural grain of lumber not obscured, make its texture, check whether the wood surface texture is clear, whether brown eyes, leveling if there are some defects to be appropriate to cover.
3, observe whether there is a small flaw
because wood coatings construction undeserved, can cause lacquer face various problems, such as surface pale, grain, pinhole, defects such as cracks. Acceptance to pay attention to the don't these serious problems.
4, coating color saturation
wood coatings after drying, attention should be paid to touch the surface of paint film, look to whether smooth, thickness is uniform and qualified product surface film smooth level off, without coarse and particles, paint film on the surface of saturation are in good condition, whether the reflective evenly.
5, the side brush is in place, the ground
many people focus on the surface of wood coatings, but on the side and underside is ignored, so be sure to avoid coating is not complete, in addition to the surface of the furniture, side, back, and the position of the bottom and not easy to besmear to brush inside must besmear to brush in place.
6, the hardware is clean and neat
wood coatings construction, must complete protection for hardware accessories, because these things easily with paint, and difficult to handle, therefore in the construction, attention should be paid to check whether these items protection in place.
waterborne wood paint construction details
1, color, whether to have error
in the wood coatings construction, pay attention to the color error, surface color is even, if there is a different shade of color, to make sure that the surface no color, no brush marks.
2, clear wood grain is
for transparent paint effect of wood, painted furniture, should guarantee the natural grain of lumber not obscured, make its texture, check whether the wood surface texture is clear, whether brown eyes, leveling if there are some defects to be appropriate to cover.
3, observe whether there is a small flaw
because wood coatings construction undeserved, can cause lacquer face various problems, such as surface pale, grain, pinhole, defects such as cracks. Acceptance to pay attention to the don't these serious problems.
4, coating color saturation
wood coatings after drying, attention should be paid to touch the surface of paint film, look to whether smooth, thickness is uniform and qualified product surface film smooth level off, without coarse and particles, paint film on the surface of saturation are in good condition, whether the reflective evenly.
5, the side brush is in place, the ground
many people focus on the surface of wood coatings, but on the side and underside is ignored, so be sure to avoid coating is not complete, in addition to the surface of the furniture, side, back, and the position of the bottom and not easy to besmear to brush inside must besmear to brush in place.
6, the hardware is clean and neat
wood coatings construction, must complete protection for hardware accessories, because these things easily with paint, and difficult to handle, therefore in the construction, attention should be paid to check whether these items protection in place.
