Waterborne wood coatings so can prolong the service life of furniture waterborne wood paint are _ | opal chemical water-based paint
by：Opal
2021-01-18
As people more and more high to the requirement of home decoration.
Because wooden furniture is environmental protection, and also beautiful natural appearance, so we become the preferred type of furniture.
In order to make wooden furniture adornment effect is better, use longer and can give a brush on a layer of wood lacquer furniture, so as to protect.
Today, you go with small make up understanding, waterborne wood coatings how construction can prolong the service life of wooden furniture.
1, base material handling
the protection of base material processing, largely determine the service life of furniture. Wood moisture content is higher than 12%, when touching have damp feeling can't construction.
2, construction before the substrate processing
the closed closed primer, primer before closed to keep the substrate clean, smooth, to remove surface dust, oil pollution, especially the glue. Then the construction.
3, scraping putty
in the handle on the substrate, if the surface is rough, need to shave with 1 - The transparent putty 3 times, 2 - apart 3 hours, smooth level off, dry, without grinding between the layers. Generally in again after the primer, coating is better.
besmear to brush paint, coating 2 - The primer 3 times, 4 - apart (after 5 hours, every time do a good Depending on the humidity and climate conditions) With 800 # sandpaper.
: besmear brushs paint besmear brushs 2 - The paint 3 times, 4 - apart After 5 hours, every time do a good, with more than 800 # light sand paper burnish.
4, grinding
wood before besmear brushs waterborne wood coatings, to besmear too oily primer, paint must be polished away, generally use 360 # sandpaper, remove dust can besmear brushs waterborne wood coatings, otherwise will affect coating adhesion.
5, clean
when undertaking construction coating primer, for part of the base material of rough, should be with 360 - first 400 # substrate of sand paper burnish, remove after grinding dust, can besmear to brush paint, otherwise will affect future construction effect.
1, base material handling
the protection of base material processing, largely determine the service life of furniture. Wood moisture content is higher than 12%, when touching have damp feeling can't construction.
2, construction before the substrate processing
the closed closed primer, primer before closed to keep the substrate clean, smooth, to remove surface dust, oil pollution, especially the glue. Then the construction.
3, scraping putty
in the handle on the substrate, if the surface is rough, need to shave with 1 - The transparent putty 3 times, 2 - apart 3 hours, smooth level off, dry, without grinding between the layers. Generally in again after the primer, coating is better.
besmear to brush paint, coating 2 - The primer 3 times, 4 - apart (after 5 hours, every time do a good Depending on the humidity and climate conditions) With 800 # sandpaper.
: besmear brushs paint besmear brushs 2 - The paint 3 times, 4 - apart After 5 hours, every time do a good, with more than 800 # light sand paper burnish.
4, grinding
wood before besmear brushs waterborne wood coatings, to besmear too oily primer, paint must be polished away, generally use 360 # sandpaper, remove dust can besmear brushs waterborne wood coatings, otherwise will affect coating adhesion.
5, clean
when undertaking construction coating primer, for part of the base material of rough, should be with 360 - first 400 # substrate of sand paper burnish, remove after grinding dust, can besmear to brush paint, otherwise will affect future construction effect.
