Waterborne wood paint furniture use notice _ wood coatings | opal chemical water-based paint
by：Opal
2021-01-18
After the use of waterborne wood paint coating, coating maintenance has become the key of paint film on the surface of the furniture, in particular, if a good maintenance, paint film crystal clear all the year round, if brightness is new, or waterborne wood lacquer furniture will soon be dark color, paint film cracked spalling.
Here, let small make up share of waterborne wood paint furniture use matters needing attention.
1, wood furniture in waterborne wood paint coating after a week, keep the indoor air flow and temperature and humidity is moderate, ensure the hardness of paint film on the surface of the furniture at normal.
2, waterborne wood lacquer painting furniture can bear the high temperature of water, but avoid by all means and films such as radiator heater near the fire, in order to avoid high temperature baking causes deformation of wood furniture, lead to crack, flake paint film surface.
3, try to avoid contact with high levels of the chemical reagent, so as not to damage the paint film.
4, if wooden furniture spots on the surface of paint film, should immediately with low concentration of soap or detergent washing water, remove with clean water and dry again.
5, waterborne wood lacquer furniture surface of deliberately collision and the knife with good thing score, otherwise easy to cause hard damage to the paint film.
6, vitreous mesa, if any, shall be laid under the cotton cloth, should not be directly laid paper or plastic film, or a long time, paper and plastic film adhesion on the paint film, damage the paint film.
1, wood furniture in waterborne wood paint coating after a week, keep the indoor air flow and temperature and humidity is moderate, ensure the hardness of paint film on the surface of the furniture at normal.
2, waterborne wood lacquer painting furniture can bear the high temperature of water, but avoid by all means and films such as radiator heater near the fire, in order to avoid high temperature baking causes deformation of wood furniture, lead to crack, flake paint film surface.
3, try to avoid contact with high levels of the chemical reagent, so as not to damage the paint film.
4, if wooden furniture spots on the surface of paint film, should immediately with low concentration of soap or detergent washing water, remove with clean water and dry again.
5, waterborne wood lacquer furniture surface of deliberately collision and the knife with good thing score, otherwise easy to cause hard damage to the paint film.
6, vitreous mesa, if any, shall be laid under the cotton cloth, should not be directly laid paper or plastic film, or a long time, paper and plastic film adhesion on the paint film, damage the paint film.
