Waterborne wood paint transparent color waterborne wood paint are construction technology _ | opal chemical water-based paint
by：Opal
2021-01-18
About the construction technology of waterborne wood coatings, small make up also share a lot before, today, to bring you a piece of wood coatings transparent color construction technology features, look, everybody can create log lubricious wood household space effect!
waterborne wood paint drying has close relationship with temperature, humidity, so before construction should pay attention to: 5 ℃ or higher temperature, the humidity of 85% or less.
step 1 plate processing
use sand paper burnish, in the wood grain direction aggrandizement wood grain effect, clean sheet surface, make it smooth level off, without burr, without oil.
step 2 sheet enclosed
in order to better sealing material plate, to prevent the floating plate color, effect, the use of closed primer is very important, the wood grain direction 1 times evenly, after work without burnish.
step 3 bottom color
want wood grain color change at the same time, strengthen the wood grain clarity and the administrative levels, with out cotton dry dishcloth, stained with adequate bottom color paint, coating and uniform circle can directly receive color, without burnish.
step 4 substrate closed
the bottom color, don't forget to use water-based closed primer, closed to substrate coloring, avoid subsequent color extravasation, 2 times.
in step 5 plank wipe
want to change the color of the plate surface, presents a new result, the use of varnish, a brush, brush, become angry easily. Dipping varnish, evenly along the grain, wait for dry after four hours, with out cotton cloth of color.
step 6 coating primer
note that water is more than 10%, avoid by all means is too much, too much can cause bad adhesion, cracking, such as loss of light lacquer disease, besmear brushs twice over primer, after every action, need to use sand paper burnish, and remove dust.
step 7 besmear brushs paint
the use of chemical fiber brush 2 - evenly Three times paint.
waterborne wood paint drying has close relationship with temperature, humidity, so before construction should pay attention to: 5 ℃ or higher temperature, the humidity of 85% or less.
step 1 plate processing
use sand paper burnish, in the wood grain direction aggrandizement wood grain effect, clean sheet surface, make it smooth level off, without burr, without oil.
step 2 sheet enclosed
in order to better sealing material plate, to prevent the floating plate color, effect, the use of closed primer is very important, the wood grain direction 1 times evenly, after work without burnish.
step 3 bottom color
want wood grain color change at the same time, strengthen the wood grain clarity and the administrative levels, with out cotton dry dishcloth, stained with adequate bottom color paint, coating and uniform circle can directly receive color, without burnish.
step 4 substrate closed
the bottom color, don't forget to use water-based closed primer, closed to substrate coloring, avoid subsequent color extravasation, 2 times.
in step 5 plank wipe
want to change the color of the plate surface, presents a new result, the use of varnish, a brush, brush, become angry easily. Dipping varnish, evenly along the grain, wait for dry after four hours, with out cotton cloth of color.
step 6 coating primer
note that water is more than 10%, avoid by all means is too much, too much can cause bad adhesion, cracking, such as loss of light lacquer disease, besmear brushs twice over primer, after every action, need to use sand paper burnish, and remove dust.
step 7 besmear brushs paint
the use of chemical fiber brush 2 - evenly Three times paint.
