What are the space requirements and standards really stone paint?

Use really stone paint exterior wall is just a desire to have real stone. However, some exterior wall project made by really stone paint materials do not have the effect of really stone paint. During this period, a large part of factor is due to a lack of true stone paint processing or partitioning plan is not perfect. Pay attention to the following factors: (really stone paint partition technology 1) Really stone paint partition shapes in order to prevent external wall is not flexible, try not to choose in the process of really stone paint construction square partition, such as horizontal partition, vertical long partition and partition is 'I' is a good choice. Construction should be considered, however, the application of function. For example, a business unit office building should choose the partition plan more carefully, and residential, shopping malls, schools, stadiums, etc. Can choose a more vivid zoning plan. ( 2) Really stone paint grid direction in order to make the closer to the stone really stone paint spraying, in principle, you can use the same as the stone of the grid, such as Yin and Yang Angle of the grid, the window edge mesh grid and architecture. However, given the limitations of stone, really stone paint can not separate Angle of Yin and Yang. It is suggested that it is necessary to separate in the side of the window, and be careful not to appear small and small. ( 3) Really stone paint should be divided into according to the structure of the concave and convex sex, two parts. Usually, the top section of 1. 5 - A control in 1-2 ㎡ multi-layered section 1. 5 ㎡, the lower section control within 1 ㎡. ( 4) Really stone paint frame joint width the width of the frame joints should be according to the frame size, reasonable planning, usually at 0. 8 - 1. 5 ㎝, can also be planning for horizontal width, width of the vertical and horizontal width, but the width of the frame joints should be controlled in 2 ㎝. ( 5) Really stone paint construction grid joints is often simply ignore the color of the detail, but it is practical for the overall functionality of a really stone paint. The general planning principle is, true stone paint color and the color of the grid joint form contrast. Really stone paint base material the most stringent inspection standards 1. Surface flatness: dislocation typically require less than 3 mm. If more than this range, need polishing to make it flat. 2. Without stratification, empty drum, surface crack, no greater than zero. 2 mm wind crack, no obvious defects such as sand holes. 3. Surface to senior plaster, namely the production plane straightness is not more than 3 mm, surface roughness is less than 2 mm, Yin and Yang Angle straightness is less than 2 mm, founder of 2 mm. Appearance must level off, clean, uniform color, no crack, apparent juncture, dust, grease, exposed steel, wire, wood chips, red and grey line flat, clear and beautiful. 5. Angle guard, etc. Should comply with the regulations of the construction standard, the separation seam ( Belt) Width and depth should be uniform, smooth, level off, the edges should be neat, horizontal, flat, vertical. 6. The underlying basicity: bottom wall surface acidity less than 10. 7. New brush at moisture content, moisture content is less than 8%, the bottom mortar surface can only 3 weeks after the construction.