Factors influencing the really stone paint color have? 2019 KeBao paint entire network

With the development of social economy, the stability of the really stone paint products is getting better and better. Throughout, however, really stone paint industry, really stone paint color difference has been really stone paint first common quality problems in construction, ranging from raw material source to every aspect of the follow-up construction. This does not only rely on outside force to solve, in true stone paint construction process, need to be careful. Next, to share with you KeBao building materials will affect really stone paint color difference factors. Factor 1: different source with the color sand color difference when it comes to really stone paint color difference, the first is raw material colour sand off color, this is the main reason. In different regions, different source, even if is the same color system, color difference is very big. Chrysanthemum yellow as special case, different sources and different source between the color difference is extremely obvious. Therefore, when a customer to really stone paint manufacturers ( As a responsible manufacturer) Place an order, they will advise clients to buy in large quantities with a batch number or according to the plan to set aside allowance, in order to prevent the true stone paint needs to be restocked, and under the condition of the waste too much cause off color, this is an obvious reason. Different mines have off color, but even from the same source and different batch, color difference is inevitable. Reason is that the color sand is pure natural products, it depends on the formation of natural factors. Therefore, because of the location for different raw materials, different batch chromatism. Factor 2: color difference caused by the production process if the source to obtain the very good control color, to say the color difference can avoid the maximum? Of course not. In the process of production, the production of different capacity cylinder is limited by mixing speed and mixing time. Because of the degree of integration, emulsion particle size and the color sand, really stone paint wet material also can have off color. In order to maximize the avoid off color, single cylinder expanding production capacity has become the main task of the many really stone paint companies. Production of axes, the greater the control of the production quality is more strict. On the contrary, many manufacturers will produce axis to the axis of the color difference is more serious, because the cylinder is too big, not enough mixing, lead to the same batch chromatism problem. In addition, using the large axe, the biggest risk is mixed a long time will appear after the emulsion demulsification phenomenon, lead to really stone paint quality decreased obviously, in the future there will be faded quality problems, such as accelerated ageing and leg. However, under the condition of wet film cannot be demulsification judgment and discovery. Therefore, the use of large-scale production shaft is definitely not the right thing to do. Factor 3: really stone paint colour difference caused by wrong construction in the process of construction, different batches of raw materials on the same building should be avoided. For this reason the front has been mentioned. At the same time, in order to better control the color difference in the construction, the same walls shall be the same coating thickness and the same construction process, to avoid spraying artificial color difference caused by uneven. Actual construction include light and humidity difference. Therefore, when constructing the metope of the same, whole metope should be in the corresponding period to complete together. Suggest not to complete the construction in a few days, to minimize the influence of the color difference. In addition to these main factors, and many other aspects will cause the corresponding influence, such as different brand paint mixing, primers and paint color difference between too big. These can be in the range of human control to avoid as much as possible. Therefore, in the actual construction, every link should be handled with care, to effectively avoid the color difference. Is KeBao building materials share the brightness of the photo above factor, really stone paint. No matter how many batch project how much or supply, will not have off color. Therefore, in order to solve the problem of really stone paint batch chromatism, it is necessary to fundamentally. I hope this will help