How to let the be bored with child to achieve the effect of strong light

Putty powder, the most commonly used wall plaster. Can say, putty powder production for so many years, has been quite mature. However, in the process of construction of putty powder, if you don't pay attention to, problems will occur. To ensure that the putty walls bright solid know-how is what? Construction is very delicate and meticulous putty powder. In general, it is divided into three steps. These three steps are very important. Construction should grasp skilled. Putty powder construction is divided into three scratches, and the specific way of construction workers is not necessarily the same. 1. The first thing is clean up the walls. Is the purpose of cleaning outdoor dust will be connected to the wall putty powder, to lay a solid foundation for the next step. The first time is very effective, so it is important to pay special attention to, must be thoroughly dry, as dry as possible, because only a completely dry can achieve the effect. The first time the drying time is 24 hours, usually but the specific time according to the wall condition and climatic conditions. 2, and then in the second construction, because the construction has been completed, the construction is to further leveling metope, but two can't continuous construction, for the first time, be bored with child after completely dry must further flattening, the second time be bored with child can't too thin, so as to ensure the second blow be bored with child after water is absorbed by putty for the first time as soon as possible, only in the water was reduced to a certain degree of pressure. 3. Third construction putty powder, the last time is also the most important link, namely the putty powder calender. The previous construction should be the final performance, in particular, after the second blade coating, collect size a little, and then the third blade coating, and then start calender, to achieve the effect of light and strong. Light and power.