Nanchang really stone paint using method

Roman column due to its cylindrical shape and materials, many external paint decoration are not suitable for it. The main reason is the Roman column is basically made of stone, cement and glass. Accordingly, Roman column using wood lacquer adsorption are relatively poor, the effect of coating on the Roman column is often paint falls off. KeBao exterior wall coating experts recommend Roman cylinder paint really stone paint is the first choice. Really stone paint adhesion, is also applicable to the cement brick wall, foam, gypsum, aluminum plate, glass and other base. So, really stone paint can be sprayed on the Roman column. Today, we will explain in detail the Roman column really stone paint spraying technology. First of all, regardless of the true stone lacquer is used in Rome column or other base on the surface, the paint surface must be smooth. General use primer, a brush with alkali resistant seal primer. After thoroughly dry, spraying really stone paint. Spraying needs not only once and you basically need two or three times. Really stone paint spraying process, 48 hours after the completion of the final in a side spray waterborne primer paint. Among them, the spraying is the most important part of the Roman column, spraying really stone paint, the distance from cylinder should be at least 40 centimeters. But also need to take M type spraying, vertical spraying on the cylinder. Roman Columns not from down to up. They must draw from top to bottom, a painting. Also between turning Angle to be on both sides. It must be acute, 50335460 ° is the most suitable Angle. These made with real stone paint spraying Roman column should pay attention to the link. When decorating, please remember it will make you satisfied.