Really stone paint construction in the process of how to control the color difference?

Color difference means really stone paint spraying coating color is not uniform during construction, ranging from deep to shallow. Application for formula design, base treatment, construction etc. The reason of color difference, we put forward the following several corresponding control scheme. 1. Really stone paint before construction, we must attach importance to basic level processing. We must clear away all the dust and oil based on metope. About high basicity metope, must use high quality alkali resistant seal primer, can effectively prevent the alkali precipitation. Basic level processing on the quality of the coating is very important. No coating can give full play to the best effect in dealing with bad at the grass-roots level. 2. In really stone paint construction process, must strictly control the dosage. In order to save the paint, don't just spray a really stone paint. Fujian KeBao edge xiao suggests spraying twice. First of all, spray a thin layer, and then after the semi-dry or dry spray again. In this way, the construction is not cause uneven thickness, but also to prevent the flower adornment layer, spraying really stone paint 3 d effect is good. 3. Different batches of really stone paint cannot mix, because really stone paint colour sand are used in the natural, different batches of colored sand will be a slight color difference. If really stone paint with one side wall USES different batches, the results will appear.