Really stone paint construction waste too much? Do the following allows you to save material.

True stone lacquer is modern architecture commonly used stone, with the popularization and promotion of really stone paint, more and more choose to use really stone paint exterior walls. Products and the construction technology is more and more mature, but some construction ideas, not in time, resulting in a large number of materials in the process of construction waste. From the following several aspects to obtain, let everybody from the source to avoid more wasted! 1, material using high quality really stone paint. Ok really stone paint can have enough emulsion, spraying sand loss less when on metope, covering power is high, can effectively reduce the material loss. 2, product test whatever spray, there will be losses. Spraying lagged sand should be according to the construction of the product viscosity and pressure, construction personnel, construction method, etc. Suggest an product structure test before the start of the project. Spraying 3, correct construction skills before really stone paint, testing gun, adjust the pressure really stone paint spray gun, and emissions test gun, be careful not to aim the gun nozzle wall; When spraying, please remember the muzzle should be far away from 40 - metope 60 centimeters, the muzzle should be perpendicular to the wall as much as possible. If muzzle being too close to wall, a small amount evenly to repeat the spraying effect will produce wet metope, if metope too far away from the muzzle, there will be more sand fall off. Therefore, the construction personnel should be reasonable construction according to the volume of air pressure and the muzzle. After spraying, please check whether metope paint conforms to the standard. If found the problem in the process of spraying, should be resolved timely feedback, to avoid bigger problems caused by waste materials. 4, the same color paint primer is the basic function of alkali and seal, but in fact primer can also reduce consumption. In general, black primer is the most suitable for the jointing, but its use is the most true stone paint, because it covers the bottom of the black and other colors really stone paint consumption is relatively small. If set to a primer and really stone paint the same color, its dosage can also be reduced.