Speak with authority, quality is trustworthy.

Really stone paint in construction peak should pay attention to what issues?

by:Opal     2021-01-18
Really stone paint is one of the most commonly used coating our walls. Really stone paint has natural color, natural stone texture and all sorts of line design. It can provide all sorts of three-dimensional design and structure, won the favor of consumers. April weather is warm and comfortable, no storm surge, and not hot. Also ushered in the exterior walls really stone paint construction boom. Next, KeBao building materials to share with you the peak matters should be paid attention to. 1) Every time before spraying, spray should be tested on the test board in advance, and adjusting for spraying state. Official spraying should be recognized in the tonal and after spraying BuFu there is no problem. 2) Spray is not good at the early construction, should be in the back wall or shelter to try spraying, skilled after spraying the surface; 3) According to the requirements of spraying construction adjust really stone paint viscosity available water. Should be increased from less to more, and cannot be further increased. Experienced people responsible for this step is better. 4) Separation of tape should be paper tape, really stone paint has good adsorption effect. If you use adhesive tape, plastic surface will result in true stone paint. At the same time, when the temperature is high, the structure require tape with good temperature resistance, and avoid temperature slightly higher melt adhesive tape on the back. 5) Master tape tearing and uncovered the time apart. Immediately after spraying really stone paint, tear tape and expand. Really good stone paint adhesion don't need to tear after pressing or expand with the hand, no obvious phenomenon of indentation and sticky. If to tear too late and separation zone is not easy to tear, will lead to ash seam and really stone paint, torn to ash seam is not straight. 6) Mortar joint should be horizontal, flat, vertical and uniform width. The tear framework, should pay special attention to don't take off the primer. 7) Finish before construction, to ensure true stone lacquer is completely dry, it often is the key to the construction success or failure. 8) Spraying juncture place most likely uneven color, so as soon as possible after coating a coating. 9) In order to reduce the color difference, need material should be ordered at a time. 10) In really stone paint construction process, all the external Angle to decorate, side by side give a person a kind of the visual effect of the whole brick masonry. Above is KeBao building materials has really stone paint construction points for attention. In the process of construction, should strengthen the finished product protection, and take feasible protection measures. Must be paste adhesive tape to protect or straight separation joint parts and other decorative materials. I hope this is helpful to everyone. Interested in really stone paint friend can read more about really stone paint really stone paint production 'why use really stone paint bubble elimination agent' information.
Chat Online
Chat Online
Chat Online inputting...
Sign in with: