The best price for the whole year
In order to celebrate New Year's day and Chinese traditional Spring Festival, the company vigorously gives back new and old customers.
Reveal water-based paint technology and matters needing attention _ water-based paint | opal chemical water-based paint
by：Opal
2021-01-18
In recent years, water-based paint due to its relatively the composition of environmental protection, become main force of coating an outfit.
Water-based paint compared with solvent paint, its advantage is VOC emissions reduced greatly, water-based paint with a small environmental pollution, high flow flat, the advantages of good appearance.
Relatively high water-based paint construction requirements, and below small make up together to reveal the process of water-based paint.
water paint construction process
1. Basic level processing: remove dust and oil on the surface of the wood, then grinding, grinding, polishing, and clean.
2. Full blown transparent putty, putty to shave in place, net, and should not leak. To be bored with child after dry, use sandpaper smooth, again with the same putty scraping of the second full, sand, wood clear, after the ground clean.
3. Waterborne paint brush: when brushing flat vertical, bao hou uniform, no flow, brush lines smooth, no leakage brush, after working with sand paper burnish, use wet cloth to wipe dry.
quality requirements: it is strictly prohibited to peeling, leakage brush, patches, brown eyes, clear grain, soft light, smooth leveling without blocking, feel is good, no flow falling, wrinkled skin, color is consistent, no brush marks.
note
winter construction indoor shall be carried out under the condition of heating, room temperature to keep balance, should not be below 10 degrees, and the temperature difference is too large. Summer should keep ventilation during the construction of water paint, and coating after grinding smooth, fine sand paper burnish, can make the wood tightly, reduce wood grain on grain.
water paint construction process
1. Basic level processing: remove dust and oil on the surface of the wood, then grinding, grinding, polishing, and clean.
2. Full blown transparent putty, putty to shave in place, net, and should not leak. To be bored with child after dry, use sandpaper smooth, again with the same putty scraping of the second full, sand, wood clear, after the ground clean.
3. Waterborne paint brush: when brushing flat vertical, bao hou uniform, no flow, brush lines smooth, no leakage brush, after working with sand paper burnish, use wet cloth to wipe dry.
quality requirements: it is strictly prohibited to peeling, leakage brush, patches, brown eyes, clear grain, soft light, smooth leveling without blocking, feel is good, no flow falling, wrinkled skin, color is consistent, no brush marks.
note
winter construction indoor shall be carried out under the condition of heating, room temperature to keep balance, should not be below 10 degrees, and the temperature difference is too large. Summer should keep ventilation during the construction of water paint, and coating after grinding smooth, fine sand paper burnish, can make the wood tightly, reduce wood grain on grain.
Related Products
