The hardness of waterborne wood paint? _ wood coatings | opal chemical water-based paint
by:Opal
2021-01-18
In the modern environmental protection consciousness to strengthen, with industry participants keep trying, exploration and research for many years, the performance of waterborne wood coatings are improved greatly and improve, make water paint hardness, scratch resistance, and even better than the traditional paint coating on filling.
waterborne wood paint hardness
at present, the domestic waterborne wood paint products basically has 3 kinds: acrylic acid as the main components of wood coatings, acrylic and polyurethane composite as the main components of wood coatings, waterborne polyurethane paint. The aqueous polyurethane wood paint the hardness, wear resistance to paint a few times, the senior product in water-based paint.
the waterborne wood lacquer painting
the old paint film: if there is any breakage or trench, unstable place, must be thoroughly clean the whole film. New furniture: do first closed primer, prevent contamination in coating process, must pay attention to book with uniform and cannot be stacked before drying. Eye patch adopts special putty, careful not to wood grain.
waterborne wood coatings using
use of waterborne wood paint notice thin, not thick coating; Tools, wood cannot contamination to grease, paint or days that water; Available right amount clear water dilution, add water with no obvious brush marks and not sag; Besmear brushs interval time: 2 - 4 hours, depending on the environmental temperature and humidity change.
waterborne wood paint hardness
at present, the domestic waterborne wood paint products basically has 3 kinds: acrylic acid as the main components of wood coatings, acrylic and polyurethane composite as the main components of wood coatings, waterborne polyurethane paint. The aqueous polyurethane wood paint the hardness, wear resistance to paint a few times, the senior product in water-based paint.
the waterborne wood lacquer painting
the old paint film: if there is any breakage or trench, unstable place, must be thoroughly clean the whole film. New furniture: do first closed primer, prevent contamination in coating process, must pay attention to book with uniform and cannot be stacked before drying. Eye patch adopts special putty, careful not to wood grain.
waterborne wood coatings using
use of waterborne wood paint notice thin, not thick coating; Tools, wood cannot contamination to grease, paint or days that water; Available right amount clear water dilution, add water with no obvious brush marks and not sag; Besmear brushs interval time: 2 - 4 hours, depending on the environmental temperature and humidity change.