The same stone coating, really stone paint with water sand bags and colorful coating gap

True stone lacquer is to add all kinds of natural colored sand made of emulsion and various functional additives really stone paint. Really stone paint for its solemn adornment effect and similarity and stone is widely favored by consumers. Water sand bag is really stone paint colorful coating upgrade products. Emulsion content is higher than really stone paint, more vivid stone effect. The fouling resistance and weatherability were promoted. The following shows us detailed water bag difference between sand and really stone paint colorful coating: 01 degree of really stone paint: true stone lacquer is affected by natural colored sand color, the color is relatively single, so the stone types have some limitations. Compared with the stone, the simulation effect is only 90%. Especially in some special design stone, they can only die tone and texture, pattern cannot be fully reflected. Water sand bag: bag sand is a water-based stains, sand color can be mixed by hand, so the stone variety, color is rich, true effect is increased to more than 98%, designs layered effect is good. 02Anti- CrackTrue Stone Paint: as the formula, the content of high-grade latex usually at about 15%, dry film after big rigidity, crack resistance is poor. The water sand: emulsion content is usually 30%. After the dry film, the emulsion can be fully form with a range of crack resistance of coating film. 03 breathable really stone paint, has certain permeability sand wall formula. However, due to the low content of emulsion, there is no effective film between the color sand. In addition, there are too many coarse sand, which may lead to potential water seepage in the coating. The water sand: all belong to sand wall formula, has certain permeability. At the same time, due to the limited sand content, color sand small and uniform particle size, film can be achieved after breathing and waterproof performance. 04 antifouling really stone paint: surface AoTuGan is too strong. At the same time, because of the low concentration of emulsion, there is no effective film between the color sand, dust will penetrate into the coating, not easy to clean. The sand in the water, although the surface is uneven, but the emulsion completely wrapped in colored sand, and form a layer of membrane between the color sand. Dust floating on the surface, only after the rain will be clean. 05 construction facility and Low Cost really stone paint: in the past, in order to obtain better stone effect really stone paint, lots of guns is often used in construction, or on the basis of really stone paint spraying water bag water paint. As a result, not only increase the construction, influence the construction efficiency, and increase the construction labor and materials. The sand in the water, once formed, you can get a realistic effect of concave and convex stone samples. The dosage of the true stone lacquer is about 3. 5 kg/square meters, and the sand in the water is only 1 - 1. 5 kg/square meters. Therefore, water sand bag colorful coating can greatly save the cost. To sum up, water sand bag colorful coating mainly includes: the advantages of high simulation degree is high, the fouling resistance, good crack resistance and permeability is strong, low construction cost.